Solution 3: format and erase hard drive under macOS 10.13 High Sierra with AweEraser for Mac. AweEraser for Mac is a data erasure application. It can format your hard drive and erase all the data on your hard drive, beyond the scope of data recovery. It means the data on your hard drive will be permanently erased. Jun 01, 2020  The version of macOS offered by macOS Recovery might vary in some cases: If macOS Sierra 10.12.4 or later has never been installed on this Mac, Option-Command-R installs the macOS that came with your Mac, or the closest version still available. And Shift-Option-Command-R isn't available. If you erased your entire disk instead of just the startup volume on that disk, macOS Recovery might. After successfully creating the bootable USB thumb drive with macOS High Sierra using windows 7, then booting the macbook air mid 2011 with the created bootable USB thumb drive plugged in and then choosing the boot and install macOS High Sierra (the default highlighted option. MacOS High Sierra yang saya bagikan melalui link google drive di sini masih versi awal yakni 10.13.1. Sedangkan saat ini yang terbaru sudah sampai 10.13.4. Baiklah langsung saja linknya di bawah ini. Saya pecah menjadi 5 part agar gampang mengunduhnya. Belum sempat unggah yang single link. Tautan Unduhan MacOS High Sierra Google Drive. Sep 27, 2017 Booting from the macOS High Sierra USB Installer Drive With the newly created macOS High Sierra USB installer drive connected to the Mac, reboot the computer. Immediately on reboot, start holding down the “OPTION” (ALT) key to load the boot menu. Select the High Sierra installer at this screen. MacOS High Sierra yang saya bagikan melalui link google drive di sini masih versi awal yakni 10.13.1. Sedangkan saat ini yang terbaru sudah sampai 10.13.4. Baiklah langsung saja linknya di bawah ini. Saya pecah menjadi 5 part agar gampang mengunduhnya. Belum sempat unggah yang single link. Tautan Unduhan MacOS High Sierra Google Drive. If the original drive was not upgraded to High Sierra, that should be done first so the internet recovery feature on the computer is updated to High Sierra. Again, these instructions are intended for new internal SSDs only, with computers that have already had their original drive upgraded to macOS 10.13 High Sierra.

It’s almost become a tradition; one that we wish we didn’t have to put up with. It seems with each new version of the Mac operating system, there are some features that just don’t seem to work the way they used to. The tradition lives on with macOS High Sierra, so we’re gathering a list of what High Sierra broke and how to fix it (when you can).

Drive Encryption Can Change Formatting
Encrypting an entire drive to add a level of security has been an easy task in the Mac OS ever since FileVault 2 was released as part of OS X Lion. Full disk encryption has been a boon for Mac users who worry about their personal data being easily accessible on their Macs or external drives. This is especially true for portable Mac users, who need to worry about their Macs being lost or stolen.

macOS High Sierra continues to support full disk encryption, but Mike Bombich, who created Carbon Copy Cloner, has verified a bug in High Sierra that will cause an external drive to have its format changed from HFS+ to APFS when the drive is encrypted in High Sierra.

Mac Os High Sierra Update

Enabling encryption on a drive should not alter the underlying drive format. If the drive was HFS+ (Hierarchical File System) before you chose to encrypt it, it should remain an HFS+ drive afterwards. The same is true for APFS (Apple File System) formatted drives; choosing the encryption option shouldn’t change the APFS format of the drive.

Related:A Note On High Sierra Compatibility with Third Party SSDs

Under certain conditions, encrypting a drive will modify the format to APFS without the user being aware of the changes.

The specific conditions are:

• Must be an external drive
• Must not have a Mac operating system installed on the drive

If these two conditions are met, and you select the option to encrypt the drive, by right-clicking the drive icon and selecting Encrypt from the popup menu, the drive will be converted to APFS format and then encrypted.

Even though the drive has been converted to APFS and encrypted, it will continue to work just fine with your Mac running macOS High Sierra. The problem comes about should you ever connect the drive to a Mac running an earlier version of the Mac operating system, or if you boot your Mac to an earlier version of the OS. In either case, the external drive won’t be recognizable by the older operating system.

Our recommendation is not to encrypt your external drive, unless converting to APFS is acceptable to you, and you have no plans to use the drive with earlier versions of the Mac operating system.

Being Logged Out Randomly
If you find yourself occasionally being logged out of your Mac after you upgraded to macOS High Sierra, you can stop worrying; your Mac isn’t possessed. Instead, the upgrade process may have enabled two security options that you may not have been using before.

To correct the phantom logouts, launch System Preferences, either by clicking on its Dock icon, or by selecting System Preferences from the Apple menu.

In the System Preferences window, select the Security & Privacy preference pane.

From the Security & Privacy preference pane, click the Lock icon and enter your administrator credentials. Once the padlock is unlocked, click on the Advanced button.

Either remove the checkmark from “Log out after xx minutes of inactivity” or set the time frame to a longer period to meet your needs. Click the OK button when done.

The second security issue that may be causing the problem is also located in the Security & Privacy preference pane. Select the General tab.

The item: “Require password xx minutes after sleep or screen saver begins” may also be checked. You can remove the checkmark, or modify the amount of time that needs to pass before the screen saver kicks in to better fit your needs. My own preference is to leave this security feature in place, and just adjust the time as needed.

While you’re at it, you may want to jump over to the Desktop & Screen Saver preference pane to adjust the time for when the screen saver starts up.

Select the Screen Saver tab, then use the Start after: dropdown menu to select how much inactive time needs to elapse before the screen saver starts

High Sierra Battery Life is Poor
Another issue that seems to be common is portable Mac battery life being adversely affected after an upgrade to High Sierra. So far, it seems that macOS High Sierra isn’t the culprit; instead, there are a few apps that may need to be updated to make better use of the battery.

Launch Activity Monitor, located at /Applications/ Utilities.

In the Activity Monitor window, select the Energy tab.

In the resulting display, look for apps that are marked as preventing sleep, or are listed as having a high energy impact. Contact the app developer to see if there are updates available for the app to make it perform better with macOS High Sierra.

Download Mac Os High Sierra

Unable to Wake From Sleep
I’m not sure what it is about sleep, but the Mac seems to always have issues with sleep after a system upgrade. There have been reports of Macs not being able to wake from sleep after upgrading to High Sierra.

Unrelated, but with the same solution, is a flickering of the display, especially when the Safari browser is open.

You can fix both issues by resetting the NVRAM and then resetting the SMC.

You can find detailed instructions on how to perform these resets in the article:

How to Reset NVRAM, PRAM, SMC on your Mac.

Office 2011 Crashes
If you’re using Office 2011 for the Mac with macOS High Sierra, you’re not having any issues, you’re having occasional crashes, or Office simply refuses to launch at all.

That about covers most of the possibilities. The problem is Microsoft decided not to support Office 11 under macOS High Sierra, meaning they haven’t tested the apps nor are they going to offer any updates to correct any issues. Essentially, Office 2011 is on its own. If it works for you, wonderful, but if you have any issues, it may be time to consider a replacement.

Of course, software apps do get old, and Office 11 has been around for a long time, in software years. If you have a specific need for Microsoft Office, the Office 2016 for Mac version works fine and is fully supported under macOS High Sierra.

If you just need a Word or Excel work-alike that you can use to share files with others, there are a few options available. If you have a suggestion that you know works with High Sierra, please leave a note in the Comments, below.

Mail Stops Notifying You of New Mail

Have you noticed that Mail is no longer alerting you of new incoming messages via the Notifications center? If you’re used to seeing a banner pop up in the top right corner of your Mac’s display with a brief description of a new piece of mail whenever new mail arrives, you may have noticed the banners stopped once you installed High Sierra.

This bug doesn’t seem to affect everyone, but it happens often enough that Apple should be able to fix the issue in a subsequent update of High Sierra.

But you don’t need to wait for Apple; you can fix the issue yourself by opening System Preferences and selecting Notifications.

Highlight Mail in the Notifications window sidebar, and then select None as the Mail alert style. Wait a moment, then set the notifications style back to Banners or Alerts, whichever you prefer.

Close the Notifications preference pane.

Launch Mail if it isn’t already running. Mail notifications should now work correctly.

Adobe Photoshop and Illustrator Issues
Adobe Photoshop has a minor issue with High Sierra that prevents the Photoshop window from expanding to full screen whenever the Dock is shown.

Adobe has created a Photoshop plug-in file that can rectify the problem. You’ll find instructions on how to download and install the plug-in at the Adobe Help website.

Adobe Illustrator is experiencing some issues with High Sierra; specifically, the licensing system seems to be broken when the startup drive uses the APFS file system. The result is Illustrator may not launch, or there will be an error message about license problems.

Adobe recommends not upgrading to High Sierra, or not converting to the APFS file system at this time.

There’s an additional issue with Illustrator on macOS High Sierra that results in the wrong color settings being applied; specifically, Emulate Adobe Illustrator 6 becomes the default color setting and is applied to any document you open or new document you create.

The workaround is to manually change the color settings before working with any document.

Select Edit, Color Settings, and then choose the desired settings for the document.

Click OK.

Open the document you wish to work on.

You’ll need to repeat these steps each time you launch Illustrator, or before you open a document that uses a different color space.

Other High Sierra Problems and Fixes
macOS High Sierra is still relatively new, and I suspect there will be quite a few additional issues that will crop up. If you encounter any problems with using High Sierra, please feel free to share with our readers by leaving a comment.

If you’re having High Sierra install issues, you can leave a comment in the Rocket Yard guide: Common Problems During and After macOS High Sierra Installation.

[Update] Stay tuned for issues that you might encounter when running macOS Mojave.

Be Sociable, Share This!

When you have the need to format a hard drive under macOS 10.13 High Sierra, it typically requires the use of third-party hard drive format software like Disk Utility. In this article, we will introduce you a few tools you can use for formatting hard drive under macOS 10.13 High Sierra. First of all, get your data backed up before do the format. Now, let's start to format a hard drive under macOS 10.13 High Sierra with some easy tools.

Solution 1: format hard drive under macOS 10.13 High Sierra with Disk Utility

Step 1: Open Disk Utility
Open Finder > Applications > Utilities > Disk Utility

Step 2: Select the hard drive on the left.
Note: If you don't see two passages filed at that point change the view in plate utility to demonstrate the drive and the volume. The view catch is in the upper left-hand side, change to Show All gadgets. This component was presented in macOS 10.13 High Sierra
Step 3: Select ‘Erase ‘ which opens the accompanying window.
Step 4: Rename the drive
Step 5: Select OS X Extended (Journaled) for Format
Step 6: Select GUID Partition Map for Scheme
Note: If you don't see the plan choice, at that point you have chosen the volume and not the drive. Tap on the view catch in the upper left-hand side, change to Show All Devices. Select the non-indented section for your Seagate drive.
Cautioning: Formatting the drive will eradicate all data on the drive, so you should duplicate any data you need off the drive before arranging.
Step 7: Select Erase once more.
Step 8: Plate Utility will begin organizing the drive.
Step 9: Once total, click done.
Please note that the formatted data on your hard drive still can be recovered by data recovery software.

Solution 2: format hard drive under macOS 10.13 High Sierra with AweCleaner for Mac

Step 1: Download and install AweCleaner for Mac on your Mac.

Step 2: Run AweCleaner for Mac to format your hard drive.

Launch AweCleaner for Mac > Click Disk Manager > Select the hard drive and click on 'Format' button.

The data formatted by AweCleaner can be recovered by data recovery software. If you want to permanently erase data on the hard drive, you can try the solution 3.

Solution 3: format and erase hard drive under macOS 10.13 High Sierra with AweEraser for Mac

AweEraser for Mac is a data erasure application. It can format your hard drive and erase all the data on your hard drive, beyond the scope of data recovery. It means the data on your hard drive will be permanently erased.

Step 1: Download and install AweEraser for Mac on your Mac.

Step 2: Launch AweEraser for Mac to format your hard drive.

Launch AweEraser for Mac > Choose mode 'Erase Hard Drive' > Select your hard drive > Click on 'Erase' button. Then AweEraser for Mac will format your hard drive and permanently erase all data on the hard drive. The erased data will be lost forever.

Related Articles